11 High Street, Great Cambourne, Cambridge, CB23 6GX, PulsaCoil A-Class Repair Case Study

We have created this PulsaCoil A-Class repair Case Study page to enable you to see before and after images of a typical repair. Miss L contacted The Plumbing Group Limited as she was not getting hot water from her PulsaCoil A-Class and required and engineers visit. 11 High Street, Great Cambourne, Cambridge, CB23 6GX, PulsaCoil A-Class Repair Case Study, is a residential development compromising 16 high quality one and two bedroom flats which are located on the high street.

Miss L contacted The Plumbing Group Limited as her PulsaCoil A-Class was not working. On arrival our Engineer found that the unit was not heating up, on further investigation our engineer found that the off peak relay and base had burnt out and was not sending power to the off peak immersion. Our engineer explained the issue to Miss L and also explained how the PulsaCoil A-Class functions. Our engineer also checked over the unit to ensure it was working correctly and set up the most efficient heating times for the unit.

Below you will find images of the new and old relay and base in the PulsaCoil A-Class. The repair was carried out within 1 hour and Miss L was extremely happy to have hot water on her off peak.

11 High Street, Great Cambourne, Cambridge, CB23 6GX, PulsaCoil A-Class Repair Case Study

11-High-Street-Great-Cambourne-Cambridge-CB23-2GX11-High-Street-Great-Cambourne-Cambridge-CB23-2GX-2
11-High-Street-Great-Cambourne-Cambridge-CB23-2GX-311-High-Street-Great-Cambourne-Cambridge-CB23-2GX-4

 

Share This: