Bow Street, Birmingham, B1 1DW, PulsaCoil A-Class Repair Case Study

We have created this PulsaCoil A-Class repair Case Study page to enable you to see before and after images of a typical repair. Mr S contacted us when his tenants was not getting hot water from their PulsaCoil A-Class and required and engineers visit. Bow Street, Birmingham, B1 1DW, PulsaCoil A-Class Repair Case Study is a residential development compromising 14 high quality two bedroom flats which are just two minutes away from the Birmingham O2 academy.

Mr S contacted The Plumbing Group Limited as his tenants PulsaCoil A-Class was not working. On arrival our Engineer found that the unit was not heating up, on further investigation our engineer found that the off peak relay had failed and was not sending any power to the off peak immersion to heat up. Our engineer called Mr S to explain the issue to him and informed him that the unit was working correctly, our engineer also tested all over parts on the PulsaCoil A-Class to check that they function correctly.

Below you will find images of the new and old off peak relay in the PulsaCoil A-Class. The repair was carried out within 1 hour and Mr S was extremely happy that his tenants had hot water once again.

Bow Street, Birmingham, B1 1DW, PulsaCoil A-Class Repair Case Study

Bow-Street,-Birmingham,-B1-1DW-3 

 

Bow-Street,-Birmingham,-B1-1DW-4 

 

Bow-Street,-Birmingham,-B1-1DW-1 

 

Bow-Street,-Birmingham,-B1-1DW-2 

 

 

Share This: