Gledhill PulsaCoil PCS ECO


PCS-StainlessGledhill PulsaCoil PCS ECO
Stainless Steel Open Vented Thermal Store

Prices from £1080.00 plus VAT

5 Year Warranty (Sliding Scale)

In stock available to order now

Free Delivery

Direct replacement for the following thermal stores:
Gledhill PulsaCoil 3, Gledhill PulsaCoil 2000,
Gledhill PulsaCoil A Class, Gledhill PulsaCoil BP

 

PulsaCoil A Class Replacement – Gledhill PulsaCoil Stainless Steel Open Vented Cylinders

The PulsaCoil Stainless is an open vented thermal store, which does not require a pressure and temperature relief valve and subsequently does not need any discharge pipe work. It therefore overcomes the requirement of the Part G Building Regulations which prohibits the connection of a discharge pipe from an un-vented cylinder into a soil stack.

The domestic hot water is generated via a highly efficient plate heat exchanger. As hot water is demanded, it is mains cold water which is instantaneously heated as it passes through the heat exchanger and delivered to the taps.

  • Manufactured from stainless steel
  • Specifically designed for use in apartments
  • Providing mains pressure hot water utilising off-peak electric
  • Hot water is generated via a highly efficient plate heat exchanger
  • This method of generating the hot water completely removes the risk of legionella
  • Situated in the same primary water at all times
  • Do not require any annual maintenance
  • Available in 3 sizes

All prices quoted for supply only inclusive of VAT. The Plumbing Group Limited can provide an estimate for an installation service should you require, please call our installation department on freephone 0800 02 365 92.

*Disclaimer
Free delivery on all orders – Please note however that there may be a charge for deliveries made to some areas of Scotland, Scottish Isles, Channel Isles, and Northern Ireland. Please contact us for further details.
The sizing of your thermal store is your responsibility, The Plumbing Group Limited will not be held liable for under-sizing of thermal stores, the model selection guide chart has been provided by the manufacturers and is for information purposes only. Colours of external thermal storage casing may vary from the unit pictured. The Fabdec Excelsior Thermacoil’s hot water delivery system is via a mechanical blending valve, whereas the PulsaCoil 2000’s delivery system is electronically driven.
Included in the installation kit is a WRAS approved expansion vessel for the hot water pipework, and 2 * Three Kw Immersion elements and thermostats.
No allowance is made for parking charges, it is the customers responsibility to provide secure off road parking for the duration of the installation or delivery, should parking charges apply these will be added to the outstanding balance and charged to your payment card on completion.
All liability for access and routes will be the responsibility of the customer, any alterations required due to access issues will not be the responsibility of The Plumbing Group Limited to carryout or rectify, should additional time be taken due to the lack of access, this will be charged at our prevailing rates.

Share This: